GRAF Australia
Quote
GRAF Australia project support for commercial pump station maintenance

GRAF Australia

GRAF | CARE guide

Pump station maintenance in Australia

Plan inspections, sensor checks and condition reports before faults become site downtime.

Request a project quoteCall 1300 131 971

In short

Pump station maintenance keeps pumps, valves, level controls and panels serviceable through planned inspections and condition reporting. GRAF | CARE provides commercial lifecycle support for GRAF pumping and water-system assets. GRAF | LIFT, PRESS, REUSE and CARE are being rolled out Australia-wide excluding Victoria. Project delivery, commissioning and field attendance are confirmed against location and scope. Field attendance is confirmed by project location and scope.

How it works

Maintenance covers the wet well, pumps, valves, level controls and panel that keep discharge reliable.
Commercial pump station flowSite inflow enters a wet well for storage, pumps and controls lift the fluid, then discharge into a rising main or receiving system.InflowStorm / sewageWet wellUsable + emergencystorage volumePumps + panelLevel controlValves + alarmsOutRisingGRAF | LIFT packages the wet well, pumps, pipework, valves and controls

What to do next

  1. 01

    Describe the asset

    Location, wet-well type, pump count, panel details and known faults.

  2. 02

    Choose planned or reactive support

    Inspections and condition reports, or fault investigation and repair.

  3. 03

    Request GRAF | CARE attendance

    Submit via quote form or 1300 131 971. Scheduling depends on location and scope.

What a planned inspection typically covers

Pump checks, valve and pipework inspection, float and sensor testing, alarm testing, control-panel inspection, wet-well inspection, a condition report and recommended corrective actions.

Planned work reduces emergency callouts. It also creates a record for repair-versus-replace decisions later in the asset life.

GRAF commercial pump station wet well requiring planned maintenance
Wet-well access and safety arrangements must be clear before attendance.

When maintenance becomes repair

Fault investigation, pump replacement, float or sensor replacement, valve and pipework repairs, panel-component replacement and system troubleshooting sit under repair support.

Do not expect a generic national 24/7 response promise. Confirm attendance against project location and scope for Commercial Systems work.

GRAF engineered systems supported through lifecycle maintenance
Lifecycle support sits beside Service / Install commercial CARE content.

Compare options

Choose the CARE pathway that matches asset condition.

PathwayWhenOutcome
MaintainPlanned inspectionsCondition report + actions
RepairFault or failed componentRestore operation
RenewEnd-of-life or upgradeRefurbish or replace path
CommissionNew or reconfigured assetHandover and prove sequences

Specify these products

Frequently asked questions

What does pump station maintenance include?+
Planned inspections typically cover pumps, valves and pipework, floats and sensors, alarms, control-panel condition, wet-well condition, a written condition report and recommended corrective actions.
Does GRAF | CARE maintain only GRAF stations?+
GRAF | CARE is focused on GRAF commercial pumping and water-system assets. Suitable existing assets, including non-GRAF systems, may be assessed on a project basis.
Is maintenance available nationally?+
GRAF | CARE is rolling out Australia-wide excluding Victoria. Site attendance and response scheduling are confirmed against location and scope. GRAF does not publish a generic national 24/7 response promise.
How do I request maintenance support?+
Use the quote pathway on grafaustralia.com.au or call 1300 131 971 with site location, asset details and the issue or planned-maintenance scope.
What is the difference between maintain and repair?+
Maintain is planned inspection and condition reporting. Repair covers fault investigation, pump or sensor replacement, valve and pipework repairs, panel-component replacement and troubleshooting when something has failed.

Need pump station maintenance support?

Tell us the site location and asset details. Call 1300 131 971 or use the quote form.

Request a quote