GRAF Australia
Quote
GRAF commercial pump station wet well for Australian projects

GRAF Australia

GRAF | LIFT guide

Commercial pump stations in Australia

Package the wet well, pumps, valves and controls around stormwater, sewage, effluent or trade-waste duty.

Request a project quoteCall 1300 131 971

In short

A commercial pump station lifts site water where gravity drainage is not available. GRAF | LIFT combines a selected wet well with pumps, pipework, valves, level controls and a control panel around the hydraulic duty. GRAF | LIFT, PRESS, REUSE and CARE are being rolled out Australia-wide excluding Victoria. Project delivery, commissioning and field attendance are confirmed against location and scope. Quote through grafaustralia.com.au or 1300 131 971.

How it works

Inflow enters the wet well, pumps and controls lift the fluid, then discharge into the rising main or receiving system.
Commercial pump station flowSite inflow enters a wet well for storage, pumps and controls lift the fluid, then discharge into a rising main or receiving system.InflowStorm / sewageWet wellUsable + emergencystorage volumePumps + panelLevel controlValves + alarmsOutRisingGRAF | LIFT packages the wet well, pumps, pipework, valves and controls

What to do next

  1. 01

    Confirm fluid and duty

    Stormwater, sewage, effluent or trade waste, plus design inflow and head.

  2. 02

    Select wet well and package path

    Use the Pump Stations catalogue for chambers, then GRAF | LIFT for the coordinated pumping package.

  3. 03

    Quote with drawings

    Send plans and duty notes via grafaustralia.com.au or call 1300 131 971.

Where commercial pump stations are used

Typical sites include basements, car parks, loading docks, warehouses, industrial yards, apartments, hospitality venues, schools and remote facilities where gravity discharge is not available.

Trade-waste applications need fluid compatibility review. Do not assume a stormwater or sewage package is interchangeable without checking solids, chemistry and authority requirements.

GRAF underground water systems installed for Australian commercial pumping
Packaged wet wells support commercial and civil pumping projects.

What GRAF needs to size the station

Project location, design flow or inflow, static head, rising-main length and diameter, pipe material, valves and fittings, wastewater or stormwater type, solids characteristics, required storage, available power, control and BMS requirements, site access, loading, groundwater information, drawings and specification.

GRAF | LIFT, PRESS, REUSE and CARE are being rolled out Australia-wide excluding Victoria. Project delivery, commissioning and field attendance are confirmed against location and scope.

GRAF manufacturing for commercial pump station packages
Wet-well selection stays tied to verified catalogue chambers where suitable.

Compare options

Match GRAF | LIFT package path to the fluid and site duty.

PackageTypical dutyNotes
StormwaterBasements, yards, civil drainageInflow and emergency storage drive selection
SewageCommercial sewer liftSolids handling and starts matter
EffluentTreated water / irrigation transferConfirm water quality and end use
Trade wasteApplication-specific wastewaterFluid compatibility must be reviewed

Specify these products

Frequently asked questions

What is a commercial pump station?+
A commercial pump station lifts stormwater, sewage, effluent or trade waste where gravity discharge is not available. It typically combines a wet well, pumps, pipework, valves, level controls and a control panel around the site hydraulic duty.
Does GRAF supply more than the tank?+
Yes. The Pump Stations catalogue covers wet-well chambers. GRAF | LIFT is the pathway for a coordinated commercial package including pumping, controls and associated equipment.
Is GRAF | LIFT available nationally?+
The active rollout is Australia-wide excluding Victoria. Delivery, commissioning and field attendance are confirmed against the project location and scope.
What information is needed to size a commercial pump station?+
Share project location, design inflow, static head, rising-main details, fluid type, solids characteristics, storage needs, power supply, control requirements and drawings with your quote request.
Which applications does GRAF | LIFT cover?+
Stormwater, sewage, effluent and trade-waste transfer packages. Selection depends on fluid compatibility, hydraulic duty and site constraints.

Need a commercial pump station quote?

Send drawings and duty notes. Call 1300 131 971 or use the quote form. Australia-wide excluding Victoria.

Request a quote